Chemically Synthesized β-carotene is a red-orange carotenoid pigment (C₄₀H₅₆) used as a colorant and provitamin A source. It is identical to the Natural β-carotene, but is produced differently.
Synthetic Beta Carotene: Identity and Commercial Forms
The orange-red colour is due to its conjugated double-bond system. Typically, commercial synthetic material is high in all-trans-β-carotene, while the isomer profile is dependent upon process controls.
1. Identity:
The CAS number 7235-40-7 is normally given to β-carotene. Identify and assay as specified.
2. Appearance:
Crystals or powder are typically red or dark-red in colour and of high purity. Standardized preparations are available, which include a means for more convenient handling and dosage.
3. Formats:
The crystals, oil suspension, beadlets, powder dispersible, and premixes are all available. They contain active substances and agents that are different.
Synthetic Beta Carotene Production and Quality Specifications
The commercial synthesized beta-carotene is synthesized under controlled conditions with subsequent purification, crystallization, and drying. This route is suitable for the production plan, but each batch must be checked.
1. Assay and isomers:
Verify the content of β-carotene and (if applicable) its all trans/cis ratio by an appropriate chromatographic procedure.
2. Purity:
Check identity, associated carotenoids, process impurities, associated residual solvents, and loss on drying.
3. Contaminants:
Set limits for heavy metals and microbiological contaminants in the intended market. Ask for a batch COA, specification, traceability, and compliance documents.

Synthetic Beta Carotene Applications in Food, Feed, and Nutrition
Use will be determined by matrix and local rules. Synthetic beta carotene is used by manufacturers for colour uniformity (yellow/ orange-red) or to achieve a specific level of beta carotene.
1. Food and beverage:
It can be used in drinks, dairy products, confectionery, sauces, and drink powders. Typically, the aqueous products require a dispersible grade and not untreated crystals.
2. Nutrition products:
They are available in soft gel capsules (in oil) or beadlet tablets/sachets. Raw material input is determined by carrier/assay.
3. Feed and personal care:
Premixes must be evenly distributed in the feed at low levels. β-carotene is selected as a cosmetic pigment, in accordance with local rules.
Synthetic Beta Carotene Formulation and Dosage Factors
β-carotene is lipid soluble, practically insoluble in water. Directly added pure powder can float in aqueous formulas, discolour the formulas, or settle. Set the use level before the selection of the delivery system.
1. Match the grade:
For lipid phases, use oil-soluble (OS); for aqueous use, choose emulsified, beadlet, or water-dispersible. Labeling rules for checking carrier compatibility.
2. Pre-disperse:
Dispersed in an appropriate oil phase or carrier. Add slowly with good mixing, to avoid streaks and local over-concentration.
3. Calculate active content:
Use batch assay as a basis for the base. A 10% preparation has 10 times the mass of a 100% preparation to contain the same amount of β-carotene.
4. Set the use level:
There is more than one important influence that is included in the answer to this question. There are several influences involved in this answer besides color target, serving size, process loss, finished product assay, regulations, and supplier guidance. There is no one-size-fits-all correct amount of a dosage.

Synthetic Beta Carotene Stability During Processing and Storage
Oxidation and/or isomerization can be caused by oxygen, light, and heat and reduce the pigment content or colour intensity of the product. Test the stability of the final product, NOT the raw material.
1. Limit exposure:
Minimize light, air exposure, and unnecessary heat. Finally, add β-carotene to the formulation during processing, if possible.
2. Protect the dispersion:
Dispersion and protection of the pigment can be achieved by using oil phases, emulsions, and/or microencapsulation. Carriers may be maltodextrin, gum arabic, proteins, or compatible emulsifiers.
3. Package and test:
Pack in sealed, light-resistant, oxygen/ moisture barrier packs. Real-time and accelerated monitoring of assay, colour, and physical stability; and interaction with pH, minerals, and emulsifiers.
Selecting a Synthetic Beta Carotene Supplier
Identify the ingredient in the process and check consistency.
1. Technical quality:
Evaluate assay, particle shape, dispersibility, carrier, test methods, traceability, and sample availability.
2. Regulatory fit:
Review acceptable uses, limits, labelling, and acceptance of carrier for each destination market. Approval in one country does not mean that it will be approved in another.
What Is Synthetic Beta Carotene?
To summarize, chemically produced β-carotene used in the food industry is a synthetic ingredient that has controlled specifications and identity as a β-carotene. The right delivery format, assay-based dosing, protection from oxygen, light, and heat, and checks of the finished product and target market are required to make successful use of this possible.
Do you have a different opinion? Or need some samples and support? Just email donna.zh@kingsci.com or Contact Us Directly to get free samples and more professional support!
FAQ
1. What Is the Difference Between Synthetic and Natural Beta Carotene?
The chemical synthesis process produces synthetic beta carotene, while the natural process, derived from a botanical or microbial source, produces natural beta carotene. They may have different production origins, different isomer profiles and associated compounds, and various commercial specifications.
2. Is Synthetic Beta Carotene Water Soluble?
NO. Pure synthetic beta carotene is fat-soluble and almost insoluble in water. Often, water-based formulations need to be emulsified, beadlet, or specially dispersed.
3. How Is Synthetic Beta Carotene Used in Food Formulations?
Can be added to drinks, candy, dairy products and sauces, as well as powdered mixes. The grade(s) required depend on the oil or water phase, processing, and the colour desired.
4. How Much Synthetic Beta Carotene Should Be Added to a Formulation?
The addition rate will vary according to the assay of the raw material, the concentration required in the product, the nature of the product, processing efficiencies, and regulations. The amount should be calculated by the manufacturer in consideration of the actual content of active substance in the product, and not a universal dosage.
5. How Should Synthetic Beta Carotene Powder Be Stored?
Keep in a tight, light-, oxygen-, and moisture-resistant container. Store and handle with minimum exposure to heat and air.
References
1. Wei Y, Zhou D, Yang S, Dai L, Zhang L, Mao L, et al. Development of β-carotene loaded oil-in-water emulsions using mixed biopolymer–particle–surfactant interfaces. Food Funct. 2021;12(7):3246–3265.
2. Jalali-Jivan M, Rostamabadi H, Assadpour E, Tomaş M, Çapanoğlu E, Alizadeh-Sani M, et al. Recent progresses in the delivery of β-carotene: From nano/microencapsulation to bioaccessibility. Adv Colloid Interface Sci. 2022;307:102750.
3. Zimmer TBR, Mendonça CRB, Zambiazi RC. Methods of protection and application of carotenoids in foods: A bibliographic review. Food Biosci. 2022;48:101829.
4. Zhao T, He X, Yan X, Xi H, Li Y, Yang X. Recent advances in the extraction, synthesis, biological activities, and stabilisation strategies for β-carotene: A review. Int J Food Sci Technol. 2024;59(4):2136–2147.






